ROM segment 0xd000 length 0x4000 reloc 0x9400 Etherboot 5.0.7 (GPL) Tagged for [3C90X] Boot from (N)etwork or from (L)ocal? N Probing...[3C90X]Found 3Com905C-TXM ROM address 0x0000 PCI latency timer (CFLT) is unreasonably low at 0. Setting to 32 clocks. 3C90X Driver 2.00 Copyright 1999 LightSys Technology Services, Inc. Portions Copyright 1999 Steve Smith Provided with ABSOLUTELY NO WARRANTY. ------------------------------------------------------------------------------- MAC Address = 00:04:76:A0:DF:55 Connectors present: 10Base-T / 100Base-TX. Searching for server (DHCP)... ..Me: 192.168.100.17, Server: 192.168.100.20, Gateway 192.168.100.20 Loading 192.168.100.20:hostap/tagged-kernel ..(NBI)... ...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done Linux version 2.4.21-pre5-ptrace-acpi (root@stargate) (gcc version 2.95.4 20011002 (Debian prerelease)) #5 Thu Mar 27 22:37:39 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000001000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 16MB LOWMEM available. On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: rw root=/dev/nfs ip=dhcp console=tty0 console=ttyS0,9600 Initializing CPU#0 Detected 90.068 MHz processor. Calibrating delay loop... 179.40 BogoMIPS Memory: 14268k/16384k available (1008k kernel code, 1732k reserved, 284k data, 72k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Intel Pentium with F0 0F bug - workaround enabled. CPU: Intel Pentium 75 - 200 stepping 05 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0586] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize PCI: Found IRQ 11 for device 00:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0c.0: 3Com PCI 3c905C Tornado at 0x6800. Vers LK1.1.16 00:04:76:a0:df:55, IRQ 11 product code 4d57 rev 00.13 date 09-27-01 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:0c.0: scatter/gather enabled. h/w checksums enabled NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) Sending DHCP requests ., OK IP-Config: Got DHCP answer from 192.168.100.20, my address is 192.168.100.17 IP-Config: Complete: device=eth0, addr=192.168.100.17, mask=255.255.255.0, gw=192.168.100.20, host=192.168.100.17, domain=gernoth.loc, nis-domain=gernoth.loc, bootserver=192.168.100.20, rootserver=192.168.100.20, rootpath=/tftpboot/hostap/nfsroot ip_conntrack version 2.1 (128 buckets, 1024 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Looking up port of RPC 100003/2 on 192.168.100.20 Looking up port of RPC 100005/1 on 192.168.100.20 VFS: Mounted root (nfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 72k freed init started: BusyBox v0.60.5 (2003.03.27-21:41+0000) multi-call binary Mounting proc-fs Reading config file... Using /lib/modules/pcmcia_core.o Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] Using /lib/modules/i82365.o Intel PCIC probe: Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: none host opts [1]: none ISA irqs (scanned) = 10 polling interval = 1000 ms Using /lib/modules/ds.o Using /lib/modules/hostap_crypt.o Using /lib/modules/hostap.o Using /lib/modules/hostap_crypt_wep.o Using /lib/modules/hermes.o Using /lib/modules/orinoco.o cardmgr[35]: watcs: IO port probe 0x0c00-0x0cff:ching 2 sockets clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3f0-0x3ff 0x4d0-0x4d7 Mar 28 13:35:48 cardmgr[35]: starting, version is 3.2.4 Mar 28 13:35:48 cs: memory probe 0x0d0000-0x0dffff:cardmgr[35]: ini excludingtializing socket 0xd0000-0xd3fff 0 cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xc7fff Mar 28 13:35:48 cardmgr[35]: socket 0: ELSA AirLancer MC-11 Mar 28 13:35:48 cardmgr[35]: product info: "ELSA", "AirLancer MC-11", "Version 01.01", "" Mar 28 13:35:48 cardmgr[35]: manfid: 0x0156, 0x0002 function: 6 (network) Mar 28 13:35:48 cardmgr[35]: executing: 'modprobe orinoco_cs' Mar 28 13:35:48 cardmgr[35]: + insmod: /lib/modules/2.4.21-pre5-ptrace-acpi: No such file or directory Mar 28 13:35:48 cardmgr[35]: + Using /lib/modules/orinoco_cs.o Mar 28 13:35:48 cardmgr[35]: exiting Detected lucent card... Trying to download firmware... segm ofs 1F4800 len A400 dlen A400 unk 0 segm ofs 1FF000 len 1000 dlen 1000 unk 0 no matching PDA entry for plugrecord 00000150 2 no matching PDA entry for plugrecord 00000160 1C no matching PDA entry for plugrecord 00000161 100 hfw_upload: 0 Adding bridge... Switching spanning tree off Setting IP oeth0: Setting promiscuous mode. f br0 to 0.0.0.0device eth0 entered promiscuous mode (needed for bribr0: port 1(eth0) entering learning state dging on nfsroot) Adding eth0 to bridge nfs: server 192.168.100.20 not responding, still trying br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating nfs: server 192.168.100.20 OK Zeroing eth0 IPeth0: Setting promiscuous mode. eth0: Setting promiscuous mode. Adding eth1 to bdevice eth1 entered promiscuous mode ridge br0: port 2(eth1) entering learning state eth1 IEEE 802.11-DS ESSID:"public" Nickname:"HERMES I" Mode:Master Frequency:2.412GHz Access Point: 00:02:2D:2F:1E:35 Bit Rate:5.5Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry limit:4 RTS thr:off Fragment thr:off Encryption key:off Link Quality:0/0 Signal level:-37 dBm Noise level:-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Please press Enter to activate this console. br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating